Collision Avoidance and Parking Assist Systems: Service and Repair

BLIND SPOT MONITORING (BSM) BRACKET REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the rear combination light. Service and Repair

3. Remove the rear bumper. Removal and Replacement

4. Remove the BSM control module. Service and Repair

5. Remove the nuts.






6. Remove the clip.






7. Remove the BSM bracket.

8. Install in the reverse order of removal.

9. Perform the blind spot monitoring radar test. Component Tests and General Diagnostics