Radio, Stereo, and Compact Disc: Application and ID

SUPPLIER IDENTIFICATION PROCEDURE [AUDIO]

Identification Using the Label or Inscribed Lettering

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the center panel. Center Panel Removal/Installation

3. Remove the audio unit. Audio Unit Removal/Installation

4. Verify the supplier by referring to the label attached to each unit.






Verify Using the Diagnostic Assist Function

1. Switch the ignition to ACC or ON.

2. Turn the audio unit power to ON.

3. While pressing the POWER/VOLUME switch, simultaneously press the PRESET switch 5 for 3 s or more.






4. Identify the supplier code by referring to the information display.










NOTE:
- The supplier code can also be identified from the DTC displays screen.






5. Cancel the diagnostic assist function by either turning off the audio unit power or by switch the ignition to off.