Rear Door Lock Actuator Inspection

REAR DOOR LOCK ACTUATOR INSPECTION

1. Fully open the rear door glass.

2. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

3. Remove the following parts:
a. Rear door trim Rear Door Trim Removal/Installation

b. Rear inner handle Service and Repair

c. Rear door speaker Rear Door Speaker Removal/Installation

d. Rear power window motor Service and Repair

e. Rear door glass Rear Door Glass Removal/Installation

f. Rear door latch and lock actuator Service and Repair

4. Apply battery positive voltage and connect the ground to each terminal, and then verify the operation.










- If not as indicated in the table, replace the rear door latch and lock actuator.