Backup Lamp Switch: Testing and Inspection

BACK-UP LIGHT SWITCH INSPECTION

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the battery component. (ex: battery, battery tray and PCM component) (G35M-R,G66M-R) Removal and Replacement Removal and Replacement Removal and Replacement

3. Remove the aerodynamic under cover No.2. (G35-MR,G66M-R,C66M-R) Aerodynamic Under Cover No. 2 Removal/Installation

4. Disconnect the back-up light switch connector. G35M-R G66M-R

5. Verify that the continuity between the back-up light switch terminals is as indicated in the table.






- If not as indicated in the table, replace the back-up light switch.