Backup Lamp: Service and Repair

INBOARD LIGHT REMOVAL/INSTALLATION

4SD

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement

2. Remove the trunk lid trim.

3. Disconnect the connector.






4. Remove the nut.

5. Remove the bracket.

6. Remove the inboard light as shown in the figure.






7. Install in the reverse order of removal. (See Inboard Light Installation Note.)

5HB

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the service hole cover.






3. Disconnect the connector.






4. Remove the nut.

5. Remove the bracket.

6. Remove the inboard light as shown in the figure.






7. Remove the request switch. (With Advanced keyless entry and push button start system) Service and Repair

8. Install in the reverse order of removal. (See Inboard Light Installation Note.)

Inboard Light Installation Note

4SD

1. Push the bracket onto the trunk lid as shown in the figure and install.






5HB

1. Push the bracket into the liftgate as shown in the figure and install.