Overhaul

COMBINATION SWITCH DISASSEMBLY/ASSEMBLY

CAUTION:
- Handling the air bag module improperly can accidentally deploy the air bag module, which may seriously injure you. Read the air bag system service warnings and cautions before handling the air bag module. Air Bag System Service Warnings Air Bag System Service Cautions

1. Switch the ignition to off.

2. Disconnect the negative battery cable and wait for 1 min or more. Removal and Replacement Removal and Replacement Removal and Replacement

3. Remove the following parts:
a. Driver-side air bag module Standard Deployment Control System Two-Step Deployment Control System

b. Steering wheel Steering Wheel And Column Removal/Installation - Without Advanced Keyless Entry And Push Button Start System Steering Wheel And Column Removal/Installation - With Advanced Keyless Entry And Push Button Start System

c. Column cover Service and Repair

d. Clock spring Service and Repair

e. Combination switch Removal and Replacement

4. Remove the screws shown in the figures, then pull the light switch, and the wiper and washer switch in the direction of the arrow respectively to remove them.






5. Assemble in the reverse order of disassembly.