Removal and Replacement

COMBINATION SWITCH REMOVAL/INSTALLATION

CAUTION:
- Handling the air bag module improperly can accidentally deploy the air bag module, which may seriously injure you. Read the air bag system service warnings and cautions before handling the air bag module. Air Bag System Service Warnings Air Bag System Service Cautions

1. Switch the ignition to off.

2. Disconnect the negative battery cable and wait for 1 min or more. Removal and Replacement Removal and Replacement Removal and Replacement

3. Remove the following parts:
a. Driver-side air bag module Standard Deployment Control System Two-Step Deployment Control System

b. Steering wheel Steering Wheel And Column Removal/Installation - Without Advanced Keyless Entry And Push Button Start System Steering Wheel And Column Removal/Installation - With Advanced Keyless Entry And Push Button Start System

c. Column cover Service and Repair

d. Clock spring Service and Repair

4. Disconnect the connector A.






5. Disconnect the connector B.






6. Detach the clips and set the wiring harness aside.

7. Remove the screws.






8. Remove the combination switch.

9. Install in the reverse order of removal.