Auxiliary Power Outlet: Testing and Inspection

ACCESSORY SOCKET INSPECTION

Front

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the upper panel. Upper Panel Removal/Installation

3. Remove the shift lever knob. (MTX) Manual Transaxle Shift Mechanism Removal/Installation [G35M-R] Manual Transaxle Shift Mechanism Removal/Installation [G66M-R]

4. Remove the selector lever knob. (ATX) Automatic Transaxle Shift Mechanism Removal/Installation

5. Remove the shift panel Shift Panel Removal/Installation

6. Remove the accessory socket (front) Service and Repair

7. Connect a tester as shown in the figure and verify that there is continuity.






- If the continuity cannot be verified, replace the accessory socket (front).

Rear

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the following parts:
a. Upper panel Upper Panel Removal/Installation

b. Shift lever knob (MTX) Manual Transaxle Shift Mechanism Removal/Installation [G35M-R] Manual Transaxle Shift Mechanism Removal/Installation [G66M-R]

c. Selector lever knob (ATX) Automatic Transaxle Shift Mechanism Removal/Installation

d. Shift panel Shift Panel Removal/Installation

e. Side wall Side Wall Removal/Installation

f. Console Console Removal/Installation

g. Accessory socket (rear) Service and Repair

3. Connect a tester as shown in the figure and verify that there is continuity.






- If the continuity cannot be verified, replace the accessory socket (rear).