Rear Center Seat Belt Removal/Installation

REAR CENTER SEAT BELT REMOVAL/INSTALLATION

CAUTION:
- The ELR (emergency locking retractor) has a spring that will unwind if the retractor cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.

4SD

1. Remove the following parts:
a. Rear scuff plate Rear Scuff Plate Removal/Installation

b. Rear seat cushion Rear Seat Cushion Removal/Installation

c. Rear seat back Rear Seat Back Removal/Installation

d. Tire house trim Tire House Trim Removal/Installation

e. C-pillar trim. C-Pillar Trim Removal/Installation

f. Rear package trim Service and Repair

2. Remove the bolt A.






3. Remove the bolt B.






4. Remove the rear center seat belt.

5. Install in the reverse order of removal. (See Rear Center Seat Belt Installation Note.)

5HB

1. Remove the following parts:
a. Rear scuff plate Rear Scuff Plate Removal/Installation

b. Rear seat cushion Rear Seat Cushion Removal/Installation

2. Remove the bolt.






3. Remove the rear center seat belt with the rear seat back. Rear Seat Back Frame Removal/Installation

4. Install in the reverse order of removal. (See Rear Center Seat Belt Installation Note.)

Rear Center Seat Belt Installation Note

- Rotate the rear center seat belt lower anchor clockwise 180° and install it.