G35M-R

CLUTCH DISC INSPECTION [G35M-R]

Off-Vehicle Inspection

1. Inspect the lining surface for discoloration and grease adhesion.

2. Inspect the torsion spring for weakness and the rivet for looseness.

3. Using a vernier caliper, measure the depth between the lining surface and the rivet head.






- If it is less than the minimum specification, replace the clutch disc.

Clutch disc minimum depth
- 0.3 mm {0.01 in}

4. Using a dial gauge, measure the clutch disc runout.






- If it exceeds the maximum specification, replace the clutch disc.

Clutch disc maximum runout
- 0.7 mm {0.03 in}