Rear Wiper And Washer Switch Inspection

REAR WIPER AND WASHER SWITCH INSPECTION

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the following parts:
a. Front scuff plate (Driver's side) Front Scuff Plate Removal/Installation

b. Front side trim (Driver's side) Front Side Trim Removal/Installation

c. Hood release lever Service and Repair

d. Lower panel Lower Panel Removal/Installation

e. Column cover Service and Repair

f. Wiper and washer switch Service and Repair

3. Verify that the continuity between the rear wiper and washer switch terminals is as indicated in the table.






- If not as indicated in the table, replace the wiper and washer switch.