B0001:55

DTC B0001:55 / B0010:55

System Malfunction Location





Detection Condition

WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

- SAS control module configuration setting has not been done correctly

Possible Causes

- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- Driver-side air bag module or passenger-side air bag module assembly incorrect
- SAS control module malfunction

Diagnostic Procedure