B00D5:11

DTC B00D5:11 / B00D5:12 / B00D5:13

System Malfunction Location





Detection Condition

WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

- PAD indicator light circuit short to body ground
- PAD indicator light circuit short to power supply
- PAD indicator light circuit resistance high

Possible Causes

- Battery malfunction
- METER IG 15 A fuse malfunction
- PAD indicator light bulb connector malfunction
- Open circuit in wiring harness between battery and PAD indicator light bulb
- A non-standard PAD indicator bulb is installed
- PAD indicator light bulb malfunction
- Open or short circuit in wiring harness between PAD indicator light bulb and SAS control module
- SAS control module malfunction

System Wiring Diagram





Diagnostic Procedure