B10FE:55

DTC B10FD:55 / B10FE:55

System Malfunction Location





Detection Condition

WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

- SAS control module configuration setting has not been done correctly

Possible Causes

- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- Driver-side side air bag sensor No.1 or passenger-side side air bag sensor No.1 assembly incorrect
- SAS control module malfunction

Diagnostic Procedure