B1D75

DTC B1D75:55

System Malfunction Location

- Configuration setting error

Detection Condition

WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

- Parts are assembled which have no SAS control module configuration setting

Possible Causes

- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- Parts are assembled which have no SAS control module configuration setting between terminals 2F and 2H, or 3F and 3H
- SAS control module malfunction

Diagnostic Procedure