Front Bumper Reinforcement Removal/Installation

FRONT BUMPER REINFORCEMENT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Front bumper Front Bumper Removal/Installation

b. Front combination light Service and Repair

c. Aerodynamic under cover No.1 Aerodynamic Under Cover No. 1 Removal/Installation

d. Front energy-absorbing form Energy-Absorbing Foam Removal/Installation

e. Seal plate Seal Plate Removal/Installation

f. Ambient temperature sensor Full-Auto Air Conditioner Manual Air Conditioner

3. Remove the bolts A and bolts B.






4. Remove the nut C and bolt D.






5. Remove the bolts E.






6. Remove the front bumper reinforcement.

7. Install in the reverse order of removal.