Seal Plate Removal/Installation

SEAL PLATE REMOVAL/INSTALLATION

Right-side

1. Disconnect the negative battery cable.

2. Remove the front bumper. (See Front Bumper Removal/Installation)

3. Remove the front energy-absorbing form. (See Energy-Absorbing Foam Removal/Installation)

4. Remove the fasteners.






5. Pull the seal plate in the direction of the arrow shown in the figure, and then remove the tab.

6. Remove the seal plate.

7. Install in the reverse order of remove.

Left-side

1. Disconnect the negative battery cable.

2. Remove the front bumper. (See Front Bumper Removal/Installation)

3. Remove the front energy-absorbing form. (See Energy-Absorbing Foam Removal/Installation)

4. Remove the fasteners.






5. Pull the seal plate in the direction of the arrow shown in the figure, and then remove the tab.

6. Remove the seal plate.

7. Install in the reverse order of remove.