Energy-Absorbing Foam Removal/Installation

ENERGY-ABSORBING FORM REMOVAL/INSTALLATION

Front

1. Disconnect the negative battery cable.

2. Remove the front bumper. (See Front Bumper Removal/Installation)

3. Remove the fasteners.






4. Remove the front energy-absorbing form.

5. Install in the reverse order of removal.

Rear

1. Remove the rear splash shield. Service and Repair

2. Remove the rear combination light. Service and Repair

3. Remove the rear bumper. Removal and Replacement

4. Remove the fasteners.






5. Remove the rear energy-absorbing form.

6. Install in the reverse order of removal.