C-Pillar Trim Removal/Installation

C-PILLAR TRIM REMOVAL/INSTALLATION

1. Remove the following parts:
a. Rear seat cushion Rear Seat Cushion Removal/Installation

b. Rear side seat back Rear Side Seat Back Removal/Installation

2. Partially peel back the seaming welt.

3. Pull the C-pillar trim in the direction of the arrow (1), (2), (3) shown in the figure, then detaching clip A and B.






4. Remove the C-pillar trim in the direction of the arrow shown in the figure while remove the tabs C and D.






CAUTION:
- When removing the C-pillar trim, be careful not to damage the tabs C and D.

5. When installing the C-pillar, Install the new clip A to the C-pillar trim in advance.

6. Install in the reverse order of removal.