Symptom Troubleshooting

FOREWORD [FS5A-EL]

- When the customer reports a vehicle malfunction, inspect the malfunction indicator lamp (MIL) indication, AT warning indicator light flash, and diagnostic trouble code (DTC), then diagnose the malfunction according to following flowchart.

- If a DTC exists, diagnose the applicable DTC inspection. Automatic Transmission/Transaxle - DTC Table
- If a DTC does not exist, the MIL does not illuminate and the AT warning indicator light illuminate, diagnose the applicable symptom troubleshooting. Symptom Troubleshooting Item Table

NOTE:
- If a tire of a different diameter from the standard tire is installed, the TCM determines that the driving mode is the AAS mode, and may change to a different shift timing from the normal timing.





*: Malfunction Indicator Lamp (MIL), AT warning light.