Component Tests and General Diagnostics

DIAGNOSTIC ASSIST FUNCTION [AUDIO]

Display Inspection

1. Turn the ignition switch to the ACC or ON position.

2. Turn the audio unit power to ON.

3. While pressing the POWER/VOLUME switch, simultaneously press the SEEK/TRACK switch (UP) for 0.2 s or more.






4. Inspect according to the following table:





5. Cancel the diagnostic assist function by either turning off the audio unit power or by turning the ignition switch to the LOCK position.

Switch Inspection

1. Turn the ignition switch to the ACC or ON position.

2. Turn the audio unit power to ON.

3. While pressing the POWER/VOLUME switch, simultaneously press the PRESET switch 3 for 0.2 s or more.






4. Inspect according to the following table:





5. Cancel the diagnostic assist function by either turning off the audio unit power or by turning the ignition switch to the LOCK position.

Speaker Inspection

1. Turn the ignition switch to the ACC or ON position.

2. Turn the audio unit power to ON.

3. While pressing the POWER/VOLUME switch, simultaneously press the AUTO-M/ESN switch for 0.2 s or more.






4. Inspect according to the following table:





5. Cancel the diagnostic assist function by either turning off the audio unit power or by turning the ignition switch to the LOCK position.

Radio Reception Condition Inspection

1. Turn the ignition switch to the ACC or ON position.

2. Turn the audio unit power to ON.

3. Tune in the radio.

4. While pressing the POWER/VOLUME switch, simultaneously press the M/PRESET switch 2 for 0.2 s or more.






5. Inspect according to the following table:

CAUTION:
- Even if the system is normal, radio reception may be difficult depending on where the system is inspected (indoors/outdoors, or conditions at the location). Before inspecting the system, verify that radio reception is adequate.
- When performing the inspection, select the best area for receiving radio frequencies.





6. Cancel the diagnostic assist function by either turning off the audio unit power or by turning the ignition switch to the LOCK position.

Antenna Control Condition Inspection

1. Turn the ignition switch to the ACC or ON position.

2. Turn the audio unit power to ON.

3. Tune in the radio.

4. While pressing the POWER/VOLUME switch, simultaneously press the SIRIUS switch for 0.2 s or more.






5. Inspect according to the following table:





6. Cancel the diagnostic assist function by either turning off the audio unit power or by turning the ignition switch to the LOCK position.

Audio Amplifier Control Condition Inspection

1. Turn the ignition switch to the ACC or ON position.

2. Turn the audio unit power to ON.

3. While pressing the AUTO-M/ESN switch, simultaneously press the CD switch for 0.2 s or more.






4. Inspect according to the following table:





5. Cancel the diagnostic assist function by either turning off the audio unit power or by turning the ignition switch to the LOCK position.

Center Panel Specification Inspection

1. Turn the ignition switch to the ACC or ON position.

2. Turn the audio unit power to ON.

3. Tune in the radio.

4. While pressing the POWER/VOLUME switch, simultaneously press the PRESET switch 6 for 0.2 s or more.






5. Inspect according to the following table:









6. Cancel the diagnostic assist function by either turning off the audio unit power or by turning the ignition switch to the LOCK position.

Audio Amplifier Specification Inspection

1. Turn the ignition switch to the ACC or ON position.

2. While pressing the POWER/VOLUME switch, simultaneously press the SEEK/TRACK/REPLAY switch (down) for 0.2 s or more.






3. Inspect according to the following table:





4. Cancel the diagnostic assist function by either turning off the audio unit power or by turning the ignition switch to the LOCK position.

Audio Amplifier (With Bose(R)) Identify Inspection

1. Turn the ignition switch to the ACC or ON position.

2. Turn the audio unit power to ON.

3. While pressing the POWER/VOLUME switch, simultaneously press the AUTO-M/ESN switch and RPT/PRESET switch 4 for 3 s or more.






4. Inspect according to the following table:





5. Cancel the diagnostic assist function by either turning off the audio unit power or by turning the ignition switch to the LOCK position.

SIRIUS Satellite Radio Unit Software Version Verification

1. Turn the ignition switch to the ACC or ON position.

2. Turn the audio unit power to ON.

3. Tune in the SIRIUS satellite radio.

4. While pressing the POWER/VOLUME switch, simultaneously press the H/PRESET switch 1 and the PRESET switch 3 for 3 s or more.






5. Inspect according to the following table:





6. Cancel the diagnostic assist function by either turning off the audio unit power or by turning the ignition switch to the LOCK position.