Floor Covering Removal/Installation

FLOOR COVERING REMOVAL/INSTALLATION

1. Remove the battery cover.

2. Disconnect the negative battery cable. Removal and Replacement

3. Remove the following parts:
a. Seat Removal and Replacement

b. Console Console Removal/Installation

c. Side wall Side Wall Removal/Installation

d. Console panel Console Panel Removal/Installation

e. Foot rest

f. Quarter trim Quarter Trim Removal/Installation

g. Scuff plate Service and Repair

h. Front side trim Front Side Trim Removal/Installation

i. Tire house trim Tire House Trim Removal/Installation

j. Aeroboard Service and Repair

k. Front seat back bar garnish Seat Back Bar Garnish Removal/Installation

l. Back trim Back Trim Removal/Installation

4. Cut away the floor covering as shown in the figure.






NOTE:
- The cut part needs to match up when installing the floor covering.

5. Remove the fasteners A and B.






6. Remove the floor covering.

7. Install in the reverse order of removal.

Rear Floor covering (Power Retractable Hardtop)

1. Fully open the deck panel.

2. Remove the side shelf. Side Shelf Removal/Installation

3. Remove the stoppers.






4. Remove the fasteners.

5. Remove the rear floor covering.

6. Install in the reverse order of removal.