Power Retractable Hardtop Limit Switch Removal/Installation

POWER RETRACTABLE HARDTOP LIMIT SWITCH REMOVAL/INSTALLATION

NOTE:
- The power retractable hardtop limit switch is installed on the RH side.

1. Fully open the deck panel.

2. Cover both sides of the rear window glass with thick cloth to protect the window.

3. Remove the battery cover.

4. Disconnect the negative battery cable. Removal and Replacement

5. Remove the following parts:
a. Console Console Removal/Installation

b. Quarter trim Quarter Trim Removal/Installation

c. Scuff plate Service and Repair

d. Tire house trim Tire House Trim Removal/Installation

e. Aeroboard Service and Repair

f. Front seat back bar garnish Seat Back Bar Garnish Removal/Installation

g. Back trim Back Trim Removal/Installation

h. Seat belt upper anchor installation bolt Service and Repair

i. Power retractable hardtop link bracket Power Retractable Hardtop Link Bracket Removal/Installation

j. Cab-side weatherstrip Convertible Top Disassembly/Assembly

6. Disconnect the roof motor limit switch connector.

7. Disconnect the power retractable hardtop drain hose. Power Retractable Hardtop Drain Hose Removal/Installation

8. Remove the power retractable hardtop. Power Retractable Hardtop Removal/Installation

9. Remove in the order indicated in the table.










10. Install in the reverse order of removal.

Cover Installation Note

1. Install the power retractable hardtop limit switch wiring harness to the cover hook and groove shown in the figure.