Rear Wheel Alignment

REAR WHEEL ALIGNMENT

Rear wheel alignment [16-inch wheel]





Rear wheel alignment [17-inch wheel]





NOTE:
- Unloaded vehicle: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
- Difference between the left and right camber angle is within 1°.

Camber Adjustment

1. Loosen the fixing nut of the adjusting cam bolt (rear lateral link (lower)).






2. Rotate the adjusting cam bolt in either direction to adjust the camber.





Vehicle equipped with 16-inch wheel





Vehicle equipped with 17-inch wheel





*: From the end of the rear fender to the center of the wheel (mm {in})





NOTE:
- Refer to the figure for the adjusting angle per one graduation.






3. Tighten the nut.

Tightening torque
- 117.7-137.3 Nm {12.1-14.0 kgf-m, 86.9-101.2 ft-lbf}

Total Toe-in Adjustment

1. Loosen the installation nut of the adjusting cam bolt.






2. Rotate the adjusting cam bolt in either direction to adjust the toe-in.






Standard
- 3±4 mm {0.12±0.15 in} (0°17'±0°22')

NOTE:
- Refer to the following figure for the adjusting angle per one graduation of the toe-in gauge.






3. Tighten the nut.

Tightening torque
- 67.7-91.6 Nm {6.91-9.34 kgf-m, 50.0-67.5 ft-lbf}