Top Lock Switch Inspection

TOP LOCK SWITCH INSPECTION

1. Cover both sides of the rear window glass with thick cloth to protect the window.

2. Disconnect the negative battery cable. (See Removal and Replacement)

3. Remove the following parts:
a. Console Console Removal/Installation

b. Quarter trim Quarter Trim Removal/Installation

c. Scuff plate Service and Repair

d. Tire house trim Tire House Trim Removal/Installation

e. Aeroboard Service and Repair

f. Front seat back bar garnish Seat Back Bar Garnish Removal/Installation

g. Back trim Back Trim Removal/Installation

h. Seat belt set plate Service and Repair

i. Seat back crossmember assembly Service and Repair

j. Rear side trim Rear Side Trim Removal/Installation

k. Rear package trim Rear Package Trim Removal/Installation

l. Side shelf Side Shelf Removal/Installation

m. Seat belt upper anchor installation bolt Service and Repair

4. Inspect for continuity between the top lock switch terminals.






- If not as specified, replace the striker. Convertible Top Disassembly/Assembly