Hazard Warning Switch: Testing and Inspection

HAZARD WARNING SWITCH INSPECTION

1. Remove the battery cover.

2. Disconnect the negative battery cable. Removal and Replacement

3. Remove the following parts:

- Side wall Side Wall Removal/Installation
- Center panel unit Center Panel Unit Removal/Installation
- Glove compartment Service and Repair
- Decoration panel (passenger's side) Decoration Panel Removal/Installation
- Hazard warning switch Service and Repair

4. Verify that the continuity between the hazard warning switch terminals is as indicated in the table.






- If not as indicated in the table, replace the hazard warning switch.