Cylinder Head Assembly
Cylinder Head AssemblyTorque & Sequence
Tighten the cylinder head bolts in the order shown with the following 5 steps using the SST (49 D032 316).
Tighten to 5.0 Nm {51.0 kgf-cm, 44.3 in-lbf}
Tighten 13-17 Nm {1.4-1.7 kgf-m, 10.0-12.5 ft-lbf}
Tighten 44-46 Nm {4.5-4.6 kgf-m, 32.5-33.9 ft-lbf}
Tighten 88°-92°
Tighten 88°-92°
Bolt re-usability
Measure the length of each cylinder head bolt.
Replace any that exceed the maximum length.
Cylinder Head Bolt Length L 145.2-145.8 mm {5.72-5.74 in}
Cylinder Head Bolt Maximum 146.5 mm {5.77 in}
Camshaft Bearing Cap Torque & Sequence
Tighten the camshaft cap bolts in the order shown with the following two steps.
Tighten to 5.0-9.0 Nm {51.0-91.7 kgf-cm, 44.3-79.6 in-lbf}
Tighten to 14.0-17.0 Nm {1.5-1.7 kgf-m, 10.4-12.5 ft-lbf}
Intake Manifold Specifications
Exhaust Manifold Specifications
Camshaft Gear/Sprocket Specifications