Programming and Relearning

DIAGNOSTIC ASSIST FUNCTION [Bluetooth SYSTEM (HANDS-FREE TELEPHONE (HF/TEL) SYSTEM)]

Software Version Verification

1. Launch the on-board diagnostic test mode. DTC Inspection - Bluetooth System (Hands-Free Telephone (HF/TEL) System)

2. Press the SEEK/TRACK switch to display the oldest error code of the error codes that have been recorded.
NOTE:
- If an error code has not been recorded, No Err is displayed.





3. Press the SEEK/TRACK/REPLAY switch (up).

4. Verify the software version.






5. To stop the on-board diagnostic test mode, ignition is switched to off.

Connection Condition Verification

1. Launch the on-board diagnostic test mode. DTC Inspection - Bluetooth System (Hands-Free Telephone (HF/TEL) System)

2. Press SEEK/TRACK/REPLAY switch (up) to display the software version.






3. Press the SEEK/TRACK/REPLAY switch (up).

4. Verify the connected unit.






5. To stop the on-board diagnostic test mode, ignition is switched to off.

Password Reset

1. Switch the ignition to ACC or ON.

2. Press the RPT/PRESET switch 2 while pressing the AUTO-M switch until the password reset verification beep sound is heard.
NOTE:
- The AUTO-M function operates when the AUTO-M switch is pressed, however, press and hold it until the password reset launches.





3. Verify that "PASSWD CLEAR" is displayed in the information display. (Displayed is approx 5s)






4. To stop the diagnostic assist function, ignition is switched to off.