Knee Bolster Removal/Installation

KNEE BOLSTER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the following parts:
a. Driver-side front scuff plate Front Scuff Plate Removal/Installation

b. Driver-side front side trim Front Side Trim Removal/Installation

c. Hood release lever Service and Repair

d. Upper panel Upper Panel Removal/Installation

e. Shift knob (MTX) Service and Repair

f. Selector lever knob (ATX) Service and Repair

g. Shift panel Shift Panel Removal/Installation

h. Side wall Side Wall Removal/Installation

i. Console Console Removal/Installation

j. Driver-side lower panel Lower Panel Removal/Installation

3. Remove the bolts.






4. Remove the knee bolster.

5. Install in the reverse order of removal.