Steering Angle Sensor: Service and Repair

STEERING ANGLE SENSOR REMOVAL/INSTALLATION

WARNING:
- Handling the air bag module improperly can accidentally deploy the air bag module, which may seriously injure you. Read the air bag system service warnings and cautions before handling the air bag module. Air Bag System Service Warnings Air Bag System Service Cautions

1. Switch the ignition to off.

2. Disconnect the negative battery cable and wait for 1 min or more. Removal and Replacement Removal and Replacement Removal and Replacement

3. Remove the following parts:
a. Driver-side air bag module Standard Deployment Control System Two-Step Deployment Control System

b. Steering wheel Steering Wheel And Column Removal/Installation - Without Advanced Keyless Entry And Push Button Start System Steering Wheel And Column Removal/Installation - With Advanced Keyless Entry And Push Button Start System

c. Clock spring Service and Repair

4. Remove the steering angle sensor.






5. Install in the reverse order of removal.