GF80.30-P-4001-01GH Remote Control Key With Transponder, Function

GF80.30-P-4001-01GH Remote Control Key With Transponder, Function

Radio remote control
When a button on the remote control key is pressed the key sends a radio signal to the all-activity module (AAM) (N10). This signal contains the alternating code and the key number for identification of the remote control key as well as the instruction to be executed. The alternating code and key number are stored in the remote control key transponder.

Transponder
The transponder in the remote control key consists of an electronic circuit with memory and a coil at the front of the key handle. The transponder coil (L11) on the ignition lock is the counter-part. When the remote control key is inserted into the ignition lock data is exchanged by means of induction between the coils (transformer principle).