TCC Pushbutton Control Module

The following components are integrated into the Tempmatic operation unit (S98):

Blower switch (1): with a 0 position and 4 levels.


NOTE: The blower switch (S3) cannot be obtained alone


Temperature selection wheel (2): with a "blue" position for no heat and manually adjustable heat position.


NOTE: In the "blue" position the system is switched to 100% recirculated air.


Air distributor switch (3): with positions: defroster nozzle, footwell, middle level and intermediate positions.

Recirculated air switch: 100% recirculated air without a time limit when the diode lights up.


AC-pushbutton: diode lights up, refrigerant compressor ON operation/air-dying
Diode does not light up, refrigerant compressor OFF no air drying/cooling operation