Headlamp: Service and Repair

Remove/Install Headlamp Unit
- except CODE (612b) Xenon headlamp







Remove/Install
1 Open engine hood
2 Unlock cover (1) at the clip (arrow A) under the lamp unit and unhook

NOTE: Installation: Lock clip again.

4 Unscrew nuts (3).

NOTE: Installation: Align the lamp unit so that the distance of the cover to the bumper is even.

5 Unhook left front headlamp unit (E1) or right front headlamp unit (E2) from the hole (arrow B) using drift (4) and pull forwards
6 Disconnect headlamp harness connector (X24)
7 Remove headlamp unit toward front
8 Install in the reverse order
9 Perform function check
10 Check and correct headlamp adjustment