Remove/Install Transponder Coil

Removing, Installing Transponder Coil







Removal, installation
1 Unclip cover (1) on right next to steering column from bottom section of instrument panel
2 Unscrew screws (4) from steering column lever
3 Remove cover shells (2, 3) from steering column switch
4 Slide control module (N26/4) out of guide or starter switch (S2)
5 Disconnect connector (N26/4x1) from control module (N26/4)
6 Press transponder coil (L11) off of cover sleeve for starter switch (S2)
7 Remove transponder coil (L11) together with control module (N26/4)
- See Special Tools below.

8 Reinstall in opposite order

Special Tools

Long Wedge P/N # 115 589 03 59 00: