AR28.10-P-0100GH Remove/Install Transfer Case

Remove/install transfer case






1 Remove engine compartment paneling

NOTE: with engine 612 rear section only.

2 Unscrew exhaust brackets (9) and (10) from exhaust
3 Unscrew bolts (14) and detach propeller shaft (13) from transfer case

CAUTION: Hang propeller shaft to one side. ensuring that the universal joint and center bearing are not damaged.

4 Unscrew bolts (12) and detach propeller shaft (11) from transfer case

CAUTION: Hang propeller shaft to one side, ensuring that the universal joint is not damaged.

5 Disconnect plug connector (3) from servomotor.