GF72.29-P-3007GH Power Windows With One - Touch Up/Down Feature, Function

GF72.29-P-3007GH Power Windows With One-touch Up/down Feature, Function
- 163 as of 1.9.01

Function requirements:
- No overvoltage/undervoltage
- Circuit 15 ON
- Power window in synchronized state (with one-touch up feature)

Function
The one-touch up or one-touch down feature is actuated by momentarily actuating power window switch beyond the first a catch point in "closing" or "opening" direction.
The function is triggered by the lower control panel control module (N72) in combination with the power window motors.

Driver's side
Is actuated via the
- left front power window switch (N72s1) and the
- front left power window motor (M10/3)

Passenger side
Is actuated via the
- right front power window switch (N72s2) and the
- front right power window motor (M10/4).

The rear power windows can be activated on the lower control panel control module (N72) with the
- left rear power window switch (N72s3)
- right rear power window switch (N72s4)

Rear compartment
The functions can be actuated on the rear control panel control module (N72/2)

via the
- left rear power window switch (N72/2s1)
- right rear power window switch (N72/2s2)
with the
- rear left power window motor (M10/5)
- rear right power window motor (M10/5)

The upper control panel control module (N72) has priority over the rear control panel control module (N72/2) when actuating the rear power window functions.

In the "one-touch up feature" the excessive force limitation feature is activated.

Function abort
The one-touch up/down feature is interrupted when
- the power window switch is actuated again or
- the pinch protection reacts during the one-touch up operation,
- the maximum motor running time is exceeded or
- the function prerequisites are no longer fulfilled.

In the case of non-synchronized windows the manual up/down feature is effective instead of the one-touch up/down feature.