Instrument Panel, Gauges and Warning Indicators: Description and Operation

GF54.30-P-9611-01E Instrument Cluster, General
- MODEL 463 with ENGINE 112.945, 113.962, 606.964 as of 1.4.98 except CODE () up to Model Year 2007 Modelljahr 07.5, �nderungsjahr 07'






0 Reset button for trip odometer
1 Outside temperature indicator
2 Trip odometer
3 Main odometer
4 Clock
h Adjusting knob for time
m Adjusting knob for time
A1 Instrument cluster
R Reset button for multifunction display

Displays in multifunction display of instrument cluster






Fault message in multifunction display






Fault: Broken sensor or cable top display
For all recognized signal paths center display
In background memory bottom display

Displays of remaining distance, remaining time or extent to which a service is exceeded, when stationary or while driving at driver's request:
- Wake instrument cluster.
- Starter switch in position "2" or when driving.
- Press reset button for trip odometer twice within 1 s:
The current remaining distance, the current remaining time or the current extent to which a service is exceeded.

Display of oil level at driver's request:
- After the starter switch is in position "2" wait for 10 s until the text "DISPLAY OIL LEVEL" and the oil can symbol appears.
- Press reset button for trip odometer twice within 1 s: The message "OIL LEVEL OK" or the current missing oil quantity appears.
If a correct oil level measurement is not possible, the text "Maintain WAITING TIME" appears.

Resetting ASSYST after oil change (oil change reset) on instrument cluster:
- Move starter switch to position "2".
- Within the first 4 seconds after starter switch is in position "2":
Press reset button for trip odometer twice within a second. The display for the service request is activated for 10 s.
- Move the starter switch into position "0" within this 10 s . The service request will continue to be displayed.
- Press reset button for trip odometer and keep pressed.
- Move starter switch to position "2".
- Continue keeping the reset button for trip odometer pressed (approx. 10 s), until the signal tone sounds and the new starting distance appears on the display.