GF83.70-G-2006A Stationary Ventilation, Function

GF83.70-G-2006A Stationary Ventilation, Function
MODEL 463 as of 1.6.94 up to 31.5.12
- with CODE (H12) Auxiliary heater

Function prerequisites
^ Vehicle heater set to "min" (microswitch S46/7 not actuated)
^ Vehicle blower set to stage "1"
^ Vehicle battery sufficiently charged
^ Stationary heater not in malfunction interlock mode

Function sequence
The stationary ventilation can be started and stopped by pressing the button "immediate heating/immediate ventilation" on the stationary heater timer (N34) or by pressing the switch on the associated RF remote control.
Moreover, the stationary ventilation can be programmed with the stationary heater timer (N34)
When stationary ventilation is started the heater actuates the stationary heater relay terminal 15/30 (K16). This connects the blower motor (M2) for the vehicle to terminal 30. The vehicle blower starts running blowing air into the passenger compartment.
Stationary ventilation can be terminated by switching off, by malfunction shut off or after expiration of the maximum ventilation time of 60 min.