E. Perform SCN Coding

I. Print Out Method





1. Input SCN Code, Coding string, and Check digit [2] manually, then Press "F3" (Figure 12)

NOTE:
Please be sure to input all of the characters of the SCN Code that you have retrieved including any sets of zeros (00). In some cases you will not have enough characters to fill all of the empty fields; in this case you must leave these fields empty.





2. The SCN Coding process is now complete when this documentation page appears (Figure 13). Press "F11" to get a printout for your records.

NOTE:
The SCN Coding process is complete at this stage and the vehicle can be released.

IL CD-Burn Method





1. If the CD is being read properly, you will see the following screen (Figure 14). Continue to carry out Coding by pressing "F3". Proceed to step 3.





2. If the CD is NOT being read properly, you will see the following screen (Figure 15). Ensure that the CD is in the SDS, and press "F3" to retry the procedure (Figure 15).

NOTE:
If the CD-Burn method is not successful, you are alternatively able to press "F4" to return to the main screen and follow the steps on performing the SCN Coding via print out method.





3. The SCN Coding process is now complete when this documentation page appears (Figure 16). Press "F11" to get a printout for your records. Remove the CD from the SDS.

NOTE:
After use, the CD must be destroyed. Do not attempt to use the same CD for another vehicle.

NOTE:
The SCN Coding process is complete at this stage and the vehicle can be released.