AZ82.60-P-0001-01RT Retrofit iPod Interface Wiring Harnesses

AZ82.60-P-0001-01RT Retrofit iPod Interface Wiring Harnesses
- except CODE (498) Japan version


Connect interface coupling (7) to iPod interface later.

Component Identification:

1 Remove MOST coupling (22) from standard radio coupling and install in radio adapter coupling (14) for interface wiring harness.

Risk of breakage: Do not kink optical waveguide, route over sharp edges or bend in radii smaller than 25 mm. Tensile forces on inserts must not exceed 65 N. Do not squeeze fiber optical cable and do not compress with clamps or tie straps.







2 Connect standard radio coupling (13) with radio adapter connector (12) from interface wiring harness
3 Connect radio adapter connector (14) for interface wiring harness to control unit