AZ82.60-P-0006-03RT Retrofit MOST Fiber Optic Cable Wiring Harness

AZ82.60-P-0006-03RT Retrofit MOST Fiber Optic Cable Wiring Harness
- with CODE (810) Sound system

Risk of breakage: Do not kink or stretch fiber optic cables and do not route them over sharp edges. The bending radius must not be smaller than 25 mm. Clamps or cable ties for securing the fiber optic cables must not be fastened too tightly.

1 Disconnect MOST connector with MOST coupling (23) of on-board MOST wiring harness from A-pillar in front passenger footwell.
2 Remove fiber optic cable module with white marking from MOST coupling (23) and fit free fiber optic cable module with white marking of on-board MOST wiring harness in MOST coupling (23).
3 Connect MOST coupling (23) of on-board MOST wiring harness to MOST connector at A-pillar in front passenger footwell.

Shown on model 164.1







4 Disconnect MOST coupling (23) from amplifier for sound system (N40/3).
5 Remove fiber optic cable module with white marking from MOST coupling (22) of amplifier for sound system (N40/3) and fit free fiber optic cable module with white marking of on-board MOST wiring harness in MOST coupling (22).
6 Connect MOST coupling (22) to amplifier for sound system (N40/3).

Shown on model 251.1