AR42.10-P-0100-01RT Check Brake System For Leaks

AR42.10-P-0100-01RT Check brake system for leaks

1 After bleeding the brake system, press the brake pedal firmly several times in order to bring the brake pads into contact with the brake disks.
2 Start the engine and press the brake pedal with approx. 200 to 300 N.
3 Check brake system for leaks.

The pressure built up in the brake system must be held without it being possible to depress the brake pedal further.

4 Check line and hose connections as well as all components of the brake system for leaks.
5 Check fluid level in brake fluid expansion reservoir and correct if necessary