GF83.10-P-2051GZ Blower Regulator, Component Description

GF83.10-P-2051GZ Blower Regulator, Component Description
- with CODE (580) Automatic air conditioning

Component Identification:

Location
The blower regulator is located on the right below the glove compartment and is attached directly to the blower motor (A32m1).


Task
For exchanging data via the local interconnect network (LIN), the blower regulator is connected to the AAC [KLA] control and operating unit (N22).

The blower regulator regulates the blower motor's voltage supply depending on the particular blower stage set at the AAC [KLA] control and operating unit.

Function
The AAC [KLA] control and operating unit relays a control voltage of 0 to 100 The blower motor regulator (operating voltage) is influenced by the following factors:% to the blower regulator. This then regulates the operating voltage for the blower motor depending on the control voltage applied from 0 to 100 %. This facilitates control of the blower motor speed from 0 - 100 %.

The blower motor regulator (operating voltage) is influenced by the following factors:
^ Blower output setting (AUTO/manual)
^ AC OFF (ON/OFF)
^ Mode status (heating, cooling)
^ Intensity of sun
^ Coolant temperature
^ Vehicle speed
^ Window, sliding roof, tilting roof positions
^ Ambient temperature
^ Fresh air/air recirculation flap actuator motor
^ Flap positions (air distribution)
^ Residual engine heat utilization function, stationary ventilation function
^ Version coding