Engine Controls - Code 061B After Programming ECU/TCU

Date: August 8, 2007

Order No.: T-B-27.60/81a

Supersedes: T-B-27.60/81 dated August 30, 2006

Group: 27

Revision History

Revision Date Purpose

a 8/8/07 Addition of Note Pertaining to Fault Code

- 8/30/06 Initial issue

SUBJECT:
Model 164.186/871
Model 251.165

After Programming Engine and/or Transmission Control Units, Fault Code 061B Stored in Transmission Control Unit

If you encounter the situation described in the above model vehicles, the cause may be a torque interface issue between the engine and transmission control modules.

To resolve, check for and install newer software for the engine control module using SDS and perform SCN coding of the engine control module as well. Perform quick test and erase fault code.

Note:
If the fault code 061B reappears, it can be ignored. This is not cause for any parts replacement.

Note:
If no newer software is available for the engine control module, simply perform the SCN coding of the engine control module.