AR91.60-P-0611-02A Deployment of Removed Airbag Units

Deployment Of Removed Airbag Units










Using the deployment device
1. Plug the 2-pin plug connector (8) into the unit to be scrapped.
2. Dial the rotary switch (4) to position "1".
3. Press the battery control pressure switch (2) and deployment pressure switch (3) simultaneously.
4. For airbag units with 2 squibs, both must be deployed. To do this, repeat steps 1 through 3 after plugging the ignition cable into the second squib.


CAUTION: Keep a distance of 10 meters for safety.

NOTE: After a successful deployment, the deployment indicator light (5) flashes.