Body - Rear Door Window Knocking Noise When Operated
Date: November 9, 2007Order No.: T-B-72.12/87
Supersedes:
Group: 72
SUBJECT:
Model 164.122/172/175/177/186/822/871/886, Up to VIN A258996
Model 251.122/156/165/175/177, Up to VIN A058266
Knocking Noise in Rear Door When Operating Power Window
If you receive customer reports in the above model vehicles of a knocking noise occurring when the power window is operated downward and reaches the lower limit position, this may be caused by a broken plastic limit stop.
To remedy perform the following.
1. Remove door lining. Refer to WIS document AR72.12-P-1010GZ (164) or AR72.12-P-1010RT (251).
2. Remove door module. Refer to WIS document AR72.12-P-0103GZ (164) or AR72.12-P-0103RT (251).
3. Remove broken limit stop from door.
4. Install new limit stop (Figure 1).
5. Reinstall door module. Refer to WIS document AR72.12-P-0103GZ (164) or AR72.12-P-0103RT (251).
6. Reinstall door lining. Refer to WIS document AR72.12-P-1010GZ (164) or AR72.12-P-1010RT (251).
7. Renormalize power windows.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on November 9, 2007. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
In Case of Warranty, use the table.