AZ82.60-P-0001-03RTA Retrofit iPod Interface

AZ82.60-P-0001-03RTA Retrofit iPod Interface
- with CODE (527) COMAND APS with single DVD drive (with navigation)
- with CODE (512) COMAND APS with DVD changer


1 Centrally align two of the Velcro strips (2) included in package contents and press together firmly.
2 Remove protective foils and glue Velcro strips (2), as illustrated, onto the iPod interface (1).







3 Remove screws/bolts (3) and remove installation frame (4) from instrument panel (5).







4 Clean bonding surfaces on instrument panel (5).

The bonding surfaces must be dry, free of dust and grease.

5 Remove protective foils from Velcro strips on iPod interface (1) and glue iPod interface (1), as illustrated, onto instrument panel (5).
6 In addition to this, centrally glue an approx. 200 mm long felt tape strip (6) onto the iPod interface (1).