GF07.61-P-2006MIG ME-SFI Idle, Function

GF07.61-P-2006MIG ME-SFI Idle, Function
- ENGINES 272.945 in MODEL 251.054 /154 as of model year 2009 / AEJ 08
- ENGINES 272.967 in MODEL 164.186 as of model year 2009 /AEJ 08 model refinement package
- ENGINES 272.967 in MODEL 164.156
- ENGINES 272.967 in MODEL 251.056 /065 /156 /165 as of model year 2009 / AEJ 08
- ENGINES 273.923 in MODEL 164.871 as of model year 2009 / AEJ 08
- ENGINES 273.963 in MODEL 164.172 as of model year 2009 /AEJ 08 model refinement package
- ENGINES 273.963 in MODEL 164.886, 251.072 /172 as of model year 2009 / AEJ 08

Function requirements for iding, general points
- Circuit 87M ON (engine control ON)
- Engine running (engine speed greater than 700 rpm)
- Accelerator not operated

Neutral, general points
The following partial functions are active in neutral and are described in the following documents:
- ME fuel supply, function
- ME-SFI [ME] injection regulation, function
- Motor electronics (ME) ignition system, function
- ME-SFI start, post-start phase and warm-up enrichment, function
- ME-SFI idle speed control function
- ME-SFI alternator interface function
- ME engine speed signal, function
- ME-SFI safety fuel shutoff, function
- ME-SFI lambda control, function
- ME-SFI two-sensor control, function
- ME-SFI oxygen sensor heater function
- Self-adjustment of mixture formation, function
- Smooth engine running analysis, function
- ME-SFI thermal management, function
- ME engine torque requests function
- Camshaft adjustment, function
- ME-SFI knock control function
- Overheating/pinging protection, function
- Air injection, function
- ME-SFI electronic accelerator, function
- Electronic accelerator pedal emergency running mode, function
- Purging function
- Monitoring catalytic converter efficiency, function