Front Axle

AR33.10-P-0100-01RT Attaching engine supporting frame and lifting engine

Component Identification:

1 Remove engine trim panel (1)
2 Mount engine support frame (2) on the inner folds of the fenders and mount the front supports (3) on the left and right of the radiator, directly next to the rubber scoops

Position the front supports (3) as close as possible to the rubber scoops, otherwise the load on the radiator crossmember will be too great.

3 Adjust the engine support frame (2) so that all the supports make contact with the inner folds of the fenders or the radiator crossmember.
4 Attach engine to eyelet (4) and lift using spindle until front engine mounts are fully relieved of load.