AZ82.70-P-0001-04RT Retrofit Wiring Harness

AZ82.70-P-0001-04RT Retrofit Wiring Harness

1 Strap down connection contact, circuit 15R (11) of red/black line (rt/sw) to accessory wiring harness (13) (not required).

Component Identification:

2 Disconnect black, 14-pin connector P4 (17) from load compartment fuse and relay box (F4).
3 Insert red line (rt) of accessory wiring harness (13) into contact cavity 12 of black 14-pin connector P4 (17).
4 Connect black, 14-pin connector P4 (17) to load compartment fuse and relay box (F4).

Component Identification:

5 Route brown line (br) of accessory wiring harness (13) as per picture and connect to ground (right wheelhouse in luggage compartment) (W7).







6 Strap down the two white, 2-pin accessory terminal connectors (14) as per picture to the on-board wiring harness.

Connect one white, 3-pin accessory connector (14) to illuminated door sill molding wiring harness later. The second white, 3-pin accessory terminal connector (14) can be used for other retrofit accessories that do not require circuit 15 either.

7 Assign a 7.5 A fuse to fuse 47 (F4f47) in the load compartment fuse and relay box (F4) (if not yet assigned).